Boost Your Antimicrobial Coating Efficiency With Our Ultrasonic Nozzle

50Khz High Frequency Ultrasonic Atomization Nozzle for antimicrobial coatings

Paramater

Item	Parameter
Frequency	50Khz
Power	10~100w
FLOW RATE (ml/min)	0~20ml/min
Spray width	2~200mm
Solution utilization	above 98%

Description Ultrasonic nozzle, also known as ultrasonic atomizing nozzle, is an ultrasonic atomizing device based on the principle of horn transducer. It atomizes the liquid through the amplified high-frequency ultrasonic oscillation, and sends the liquid mist to the object to be sprayed or a specific space through a certain amount of carrier gas. With its unique advantages, ultrasonic nozzles are widely used in the fields of nano- and sub-micron functional coating spraying, spray pyrolysis and spray drying. At the same time, ultrasonic spraying also has the advantages of uniform atomization particles, high precision, extremely low air pressure, 4 times the raw material utilization rate, and no clogging. Ultrasonic atomization is the use of electronic high-frequency oscillation (the oscillation frequency is 1.7MHz or 2.4MHz, which exceeds the range of human hearing, and the electronic oscillation has no harm to humans and animals), through the high-frequency resonance of the ceramic atomizing sheet The molecular bonds between molecules break up to produce a natural and elegant water mist, without heating or adding any chemical reagents. Compared with the heating atomization method, energy saving is 90%. In addition, a large amount of negative ions will be released during the atomization process, which will react electrostatically with smoke and dust floating in the air to make them precipitate. At the same time, it can effectively remove formaldehyde, carbon monoxide, bacteria and other harmful substances, so that the air can be purified. Reduce the occurrence of diseases. Features Large width spraying, spraying width: 40-150mm Uniform coating: uniformity>95 Saving raw materials: the utilization rate of raw materials is as high as 85%, which is 4 times that of traditional two-fluid spraying High precision of coating thickness control: It can prepare coatings from 20 nanometers to tens of micrometers, and accurately control the coating thickness Atomized particles are uniform, which can achieve ultra-low spray flow Can achieve intermittent or continuous spray Not easy to block the nozzle Anti-corrosion sprinkler Can achieve high precision and high controllability spraying Application Spraying in the field of new energy: fuel cells, thin-film solar cells Spraying in the glass field: anti-reflection AR, hydrophilic and hydrophobic coating, conductive layer, etc. Spraying in the electronic field: flux, photoresist, conformal paint Non-woven fabric and textile spraying Spraying in the biomedical field Conductive film: conductive films such as carbon nanotubes, graphene, nano silver, etc. 50Khz High Frequency Ultrasonic Atomization Nozzle for antimicrobial coatings 0

50Khz High Frequency Ultrasonic Atomization Nozzle for antimicrobial coatings 0

50Khz High Frequency Ultrasonic Atomization Nozzle for antimicrobial coatings

Products Details

Featured Products

Contact us