30khz Durable Ultrasonic Cutting Device Robot Fabric Ultrasonic Hand Cutter

Products Details

30khz Durable Ultrasonic Cutting Device Robot Fabric Ultrasonic Hand Cutter

Description
Frequency: 30khz Blade Material: Titumium
Cutting Thickness: 1~7mm Applcation: Cloth Cutting
Power: 500W Operate Type: Hand Or Robot
High Light:

ultrasonic cutting tool

,

ultrasonic food cutter

30khz durable Ultrasonic fabric cutting system with robot to cut cloth.

Introduction

The ultrasonic cutting device is composed of an ultrasonic transducer, a casing, a cutting blade and ultrasonic power supply. Ultrasonic energy generate energy with tens of millions of vibrations, and the cutting edges are bonded at the same time, so the cutting points will not produce burrs or abrasions like conventional cutting, and the cutting edges will be very flat. It can cut a variety of products that are difficult to cut with common tools, solving production and processing problems.The ultrasonic cutting machine can not only be used handheld (for temporary cutting of a small amount of material), but also can be installed on a robot arm (suitable for large-scale production line cutting.)Ultrasonic cutting also has a great advantage, that is, it can melt the cutting material while cutting. The cutting area is perfectly sealed to prevent loosening of the tissue of the material being cut (such as flashing of textile materials).So ultrasonic cutting is widly used in fabric, textile,Home textiles ,Non-woven,seat cushion, sound insulation cotton.

Parameter

Machine Ultrasonic cutting
Frequency(KHz) 30Khz
Power 500 W
Cutting Blade / Horn Titanium
Voltage(V) 220V
Cutting thickness 1~7mm
Horn amplitude 30μm
Equipment weight 6KG

Advantages

1. Cutting edge is very smooth and clean2. Cutting efficiency is more than 10 times of traditional, saving cost3. Use compressed air device to ensure the equipment can work stably for a long time4. Special replaceable blade (wear-resistant), save money5. Simple operation, hand-held cutting or cutting with a robotic arm (CNC)Suggestion: Use wood chipboard as a backboard

Application:

Ultrasonic cutting equipment is suitable for cutting:

  1. Thermoplastics (plates, sheets, films, laminates)
  2. Carbon fiber CFRP
  3. Rubber (vulcanized latex, non-vulcanized latex, film material, tube)
  4. Composites (prepregs, polyethylene fibers, carbon molded products or glass fibers (GFRP))
  5. Resin
  6. Silicone
  7. food
  8. foam
  9. Paper (honeycomb)
  10. PVC foam board

30khz Durable Ultrasonic Cutting Device Robot Fabric Ultrasonic Hand Cutter 0

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours