40Khz Handheld Ultrasonic cutting device for foam cutting

The principle of the 40K ultrasonic hand-held cutter is completely different from the traditional cutting. It uses ultrasonic energy to heat and melt the material to be cut locally, thereby to achieve the purpose of cutting materials.
send email to us

Products Details

40Khz Handheld Ultrasonic cutting device for foam cutting

Parameter
Frequency 40Khz
Frequency adjustment Auto-tracking type
Max. power output 300W
Power output Infinitive adjustment
Power supply AC200V 50/60Hz
Outer dimension (mm) 120*120*380
Weight 6kg
Blade thickness 0.6mm
  Description The principle of the 40K ultrasonic hand-held cutter is completely different from the traditional cutting. It uses ultrasonic energy to heat and melt the material to be cut locally, thereby To achieve the purpose of cutting materials. Therefore, ultrasonic cutting does not require a sharp edge, nor does it require a lot of pressure, and will not cause chipping or damage to the material being cut. Simultaneously, Because the cutting knife is doing ultrasonic vibration, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. This pair of viscous and elastic materials, frozen materials, such as food, rubber Etc., or cutting objects that are inconvenient to apply pressure, especially effective. The 40K ultrasonic hand-held cutting knife is a kind of equipment that uses wave energy for cutting processing. Its major feature is that it does not require cutting edges. In other words, instead of using a blade in the traditional sense mouth. Traditional cutting uses a knife with a sharp edge to press against the material to be cut. This pressure is concentrated at the cutting edge, and the pressure is very large, exceeding the shear of the material being cut. Shear strength, the molecular bond of the material is pulled apart, it is cut. Since the material is pulled apart by strong pressure, the cutting edge of the cutting tool should be very sharp. The material itself has to bear relatively large pressure. The cutting effect is not good for soft and elastic materials, and it is more difficult for sticky materials. The basic structure of the ultrasonic anvil-type cutting machine is similar to that of the ultrasonic cutter-type cutting machine, except that the ultrasonic output part is not a cutting knife, but a standard ultrasonic plane mold. With. Here, the mold is equivalent to an anvil. It's just that this is a cutting board that is vibrating ultrasonically. The cutting knife still uses the traditional, any shape. However, it's just that the sharpness of the cutting edge has been reduced, and the life of the cutter has been greatly extended.   Application In many cases, due to the effect of ultrasound, traditional cutting blades also allow great changes. Typically, the cutter is transformed into a cylindrical shape with raised patterns Wheels, commonly known as flower wheels. The protruding part is equivalent to the cutting edge of the cutter, and the material to be cut passes between the flower wheel and the ultrasonic cutting board. This combination can cut flowers with changes* Patterns are very low cost and efficient. This cutting method is suitable for cutting thin-film materials, such as all kinds of trademarks, clothing lace, cloth cutting, decorative bead cutting, natural fiber Vinyl, synthetic fiber, non-woven fabric, synthetic resin, paper, film cutting, slitting, etc. ultrasonic cutter

Previous:Titanium Horn 35khz 800w Ultrasonic Welding Tool

Next:Titanium Horn ultrasonic homogenizer and the dispersion

China HDPE Welding Machine and Arclic Welding Machine, ultrasonic loop welding machine, Ultrasonic Nano Dispersion, ultrasonic spraying coating, China Bag Making Machine, Mask welding machine, China Spot Welder Spot Sealing Machine, China Ultrasonic Transducer and Welding Transduer, China Transducer Reactor 2000W, ultrasonic mixing machine,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours